Text Size Default Text SizeDefault Text Size Large Text SizeLarge Text Size Largest Text SizeLargest Text Size Print Print this Page

Windows Vista/7

  1. Go to Start Menu > Control Panel
    Go to Start Menu > Control Panel
  2. Select Network and Internet (Skip this step if you are not in Category View)
  3. Select the Network and Sharing Center
    Select the Network and Sharing Center
  4. Click on Manage Wireless Networks in the left pane of the Network and Sharing Center
    ick on Manage Wireless Networks in the left pane of the Network and Sharing Center
  5. If LancerNet is already in the Network List, remove it by selecting the network and clicking on the minus button (-).
  6. Click Add, then select Manually Create a Network Profile.
    Click Add
    select Manually Create a Network Profile
  7. For the Network Name type LancerNet. For the Security Type select WPA2-Enterprise. For Encryption Type select AES. Check the boxes by Start Automatically and Connect Even if Network is Not Broadcasting
    For the Network Name type LancerNet. For the Security Type select WPA2-Enterprise. For Encryption Type select AES. Check the boxes by Start Automatically and Connect Even if Network is Not Broadcasting
  8. Click Next. Then select Change Connection Settings and click on the Security Tab.
    select Change Connection Settings and click on the Security Tab
  9. Click on Advanced Settings. Select Specify User Authentication Mode. Click on the drop down menu. Choose user Authentication. Click OK.
  10. Click on Settings.
    Click on Settings
  11. Uncheck the box for Validate Server Certificate. Then click Configure beside the Secured Password Box.
  12. Uncheck the box by "Automatically Use My Windows Logon..."
    Uncheck the box by "Automatically Use My Windows Logon…"
  13. Click OK, then click OK in the Protected EAP Properties, and then click OK in the LancerNet Wireless Network Properties.
  14. After you have completed the steps, you should see a pop-up from the taskbar similar to the one shown below. Click on the balloon and you will be prompted for your LancerNet ID and Password. The domain field is to be left blank.
    After you have completed the steps, you should see a pop-up from the taskbar
    you will be prompted for your LancerNet ID and Password. The domain field is to be left blank.